Dentasept Ultra - 5 L Can

Product type
Ready-to-use high-level disinfectant, designed for cold disinfection of heat-sensitive instruments by immersion.

Main features

• Formula: approximately 2% glutaraldehyde, buffered, pH close to 7 (neutral)

• Spectrum of action: bactericidal, fungicidal, virucidal (enveloped viruses), mycobactericidal

• Action time: about 10 minutes for most germs

• Sporicidal activity: in some protocols, 60 minutes

• Compatibility: Designed to be compatible with a wide range of instruments (stainless steel, alloys, sensitive materials)

• Bath usage time: up to 30 days

• Ready to use, no dilution required

• Container: 5 liter can

Benefits

• Ready-to-use solution, no preparation required

• Neutral pH promoting the preservation of instruments

• Good efficacy on a broad microbial spectrum

• Ideal for heat-sensitive instruments

• Extended use of the soaking bath (up to one month)

• Allows complete disinfection without thermal sterilization

Recommended instructions for use

1. Clean the instruments beforehand (remove visible dirt).

2. Completely immerse the instruments in the Dentasept Ultra solution.

3. Maintain immersion for 10 minutes for normal disinfection.

4. For spores, leave on for up to 60 minutes according to protocol.

5. Rinse thoroughly after removal to remove residual product.

6. Dry instruments before further sterilization or use.

Precautions & recommendations

• Use reserved for trained personnel and in a ventilated area

• Wear protective equipment (gloves, glasses)

• In case of contact with eyes or skin: rinse thoroughly

• Do not mix with other chemicals

• Store between +5°C and +35°C, away from frost and sunlight

• Follow the instructions on the label and the safety data sheet